RTOS, full virtualization for real-time systems, DO-178B and hypervisor for the most demanding embedded operating system applications...

Xilinx Virtex-5 FXT ML510 Embedded Development PlatformCreate high-speed serial and embedded designs utilizing the PPC440 processor

Xilinx Virtex-5 ML510 Embedded Development Platform
Boards for LynxOS-178 embedded RTOS v. coming soon
Architecture: PowerPC / Power Architecture
Processor group: AMCC 440 (formerly IBM 440)
Markets: telecommunications, industrial, medical, military and aerospace
Please consult the board-support guide or contact us for specific platform features supported.

The Xilinx® ML510 is an embedded development platform based on the Xilinx Virtex®-5 XC5VFX130T FPGA. Software and Hardware development teams can take advantage of the FPGA's dual PowerPC® 440 processors, a generous amount of FPGA fabric, and I/O capabilities that extend from the low bit rate UARTs to the high speed RocketIO™ Multi-Gigabit Transceivers (MGTs). When paired with the Xilinx Embedded Development Kit (EDK), and its catalog of IP peripherals, the ML510 can be used to rapidly prototype and verify system designs. Software applications using either standalone code or targeting an operating system, such as the LynxOS-178 RTOS, can also be created.

The package includes:

  • ML510 board (ATX form factor)
  • 512 MB CompactFlash card
  • Two 512 MB DDR2 DIMMs
  • LCD character display and cable
  • ATX power supply

Features

  • XC5VFX130T-2FFG1738CES FPGA
  • ATX form factor motherboard
  • Two 72-bit DDR2 DIMMs (512 MB each)
  • 512 MB CompactFlash (CF) card and System ACE CF controller for configuration
  • Two onboard 10/100/1000 Ethernet PHYs (MII/RGMII and SGMII) with RJ-45 connectors
  • Two PCI Express downstream connectors
  • Four 32-bit/33 MHz PCI connectors (Two 3.3V slots and two 5V slots)
  • ALi South Bridge SuperIO controller
  • Two USB peripheral ports and one parallel port
  • Two serial ATA connectors
  • Two UARTs with RS-232 connectors
  • Xilinx Personality Module (XPM) interface
  • JTAG and trace debug ports
  • IIC/SMBus interface
  • SPI EEPROM
  • General purpose I/O (GPIO)
  • Flash memory interface
  • VGA graphics interface
  • LEDs, LCD, and switches
  • Encryption battery
  • Fan controller
  • PS/2 mouse and keyboard connectors
  • 3.5mm headphone and microphone connectors

View more Xilinx boards, or learn more about Xilinx, a SynergyWorks partner.

A LynuxWorks embedded OS is featured in this embedded system application:
 
Who else uses a LynuxWorks embedded operating system?
LynxSecure Separation Kernel and Embedded Hypervisor LynxOS-SE Embedded RTOS Luminosity Eclipse-based IDE
LynxOS Embedded RTOS RTOS: LynxOS-178 for software certification

 

SpyKer Embedded-System Trace Tool

Industry Solutions

Migration

Industry Standards

Embedded Systems Technology

RTOS Training for Embedded Systems

Training at LynuxWorks

LynuxWorks Support

Embedded Systems

LynxOS RTOS Support

Embedded System Consulting

Contact Us

About LynuxWorks

Press Room

Newsletter and Announcements

Careers

Site Map

Board Support Packages (BSPs)

BSP Device Drivers

BSP Targets by Operating System

BSP Targets by Form Factor

Third-party I/O Devices and Hardware

SynergyWorks: LynuxWorks partners


What is SynergyWorks?

Third-party add-ons for LynuxWorks operating systems

Copyright © LynuxWorks™, Inc. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of LynuxWorks is prohibited.