Xilinx Virtex-4 ML410 Embedded Platform Development
BoardsDual PowerPC 405 running in a Virtex-4 platform
Xilinx ML410 is a RoHS-compliant embedded development platform based on the Xilinx Virtex™-4 XC4VFX60 FPGA. Software and hardware development teams can take advantage of the FPGA's dual PowerPC® 405 processors, a generous amount of FPGA fabric, and I/O capabilities that extend from the low bit-rate UARTs to the high-speed RocketIO™ Multi-Gigabit Transceivers (MGTs).
When paired with the Xilinx Embedded Development Kit (EDK), and its catalog of IP peripherals, the ML410 can be used to rapidly prototype and verify system designs. Software applications using either standalone code or targeting an operating system, can also be created.
Features
- XC4VFX60-11FFG1152 FPGA
- ATX form factor motherboard
- 32-bit component DDR memory (64 MB) and 64-bit DDR2 DIMM (256 MB)
- 512 MB CompactFlash (CF) card and System ACE CF controller for configuration
- Two onboard 10/100/1000 Ethernet PHYs (MII/RGMII and SGMII) with RJ-45 connectors
- Two PCI Express downstream connectors
- Four 32-bit/33 MHz PCI connectors (Two 3.3V slots and two 5V slots)
- ALi South Bridge SuperIO controller
- Two USB peripheral ports and one parallel port
- Two serial ATA connectors
- Two UARTs with RS-232 connectors
- Xilinx Personality Module (XPM) interface
- JTAG and trace debug ports
- IIC/SMBus interface
- SPI EEPROM
- General purpose I/O (GPIO)
- Flash memory interface
- VGA graphics interface
- LEDs, LCD, and switches
- Encryption battery
- Fan controller
- PS/2 mouse and keyboard connectors
- 3.5mm headphone and microphone connectors
| MicroBlaze and PowerPC Xilinx EDK 9.1 supported devices for BlueCat Linux with Xilinx Virtex-4 ML410 Embedded Platform |
| opb_uart16550_v1_00_d |
| opb_ethernet_v1_04_a |
| opb_emc_v2_00_a |
| opb_sysace_v1_00_c |
| plb_telmac_v3_00_a |
| opb_iic_v1_02_a |
| opb_gpio_v3_01_b |
| apu_fpu_v3_00_a |
View more Xilinx boards, or learn more about Xilinx, a SynergyWorks partner.