RTOS, virtualization for real-time systems, DO-178B and hypervisor for the most demanding embedded operating system applications...

MicroBlaze Xilinx Spartan-3A DSP 1800A
Low cost, entry-level environment for developing signal processing designs

Our MicroBlaze 7 board-support package will work on most MicroBlaze 7-based processor boards with the same IP core and EDK, in addition to those which we list here.
Xilinx Spartan-3A DSP 1800A
BlueCat Embedded Linux v. 5.4.3, 5.4.2
Architecture: MicroBlaze
Processor group: MicroBlaze 7
Markets: wireless, Internet appliances, telecommunications, industrial, medical, military and aerospace
Many of our target-support guides for BlueCat Linux are available for download.
Please consult the board-support guide or contact us for specific platform features supported.

The MicroBlaze Xilinx® XtremeDSP™ Starter Platform is powered by the Spartan™-3A DSP 1800A FPGA and supports industry-standard peripherals, connectors, and interfaces. This evaluation platform includes:

  • MicroBlaze development board: Spartan-3A DSP 1800A XtremeDSP Starter Platform
  • Power Supply 100-240V, 50/60 Hz with universal plug adaptors
  • USB download cable is not included and must be ordered separately
  • ISE™ WebPACK™ 9.2i Software

Key features of this MicroBlaze development board

  • Xilinx devices: XC3SD1800A-4FGG676C Spartan-3A DSP FPGA
  • Clocks
    • 125 MHz LVTTL SMT Oscillator
    • LVTTL Oscillator Socket
    • 25.175 MHz LVTTL SMT Oscillator (Video clock)
    • 25 MHz Ethernet clock (accessible to FPGA)
  • Memory
    • 128 MB (32M x 32) DDR2 SDRAM
    • 16Mx8 Parallel / BPI Configuration Flash
    • 64 Mb SPI Configuration / Storage Flash (with 4 extra SPI selects)
  • Interfaces
    • 10/100/1000 PHY
    • JTAG Programming/Configuration Port
    • RS232 Port
    • Low-cost VGA
    • 4 SPI select lines
  • Buttons and switches
    • 8 User LEDs
    • 8-position User DIP Switch
    • 4 User Push Button Switches
    • Reset Push Button Switch
  • User I/O and expansion
    • Digilent 6-pin header (2)
    • EXP Expansion Connector (2)
    • 30 pin GPIO Connector - can be used for System ACE™ Compact Flash daughter card (not included)
  • Configuration and Debug
    • JTAG
    • System ACE Module Connector
    • Eridon debug connector (SATA
  • Targeted applications: wireless, automotive, consumer, industrial, medical, military/aerospace, servers, storage, and telecom/datacom systems.

View more Xilinx MicroBlaze and PowerPC boards, or learn more about Xilinx, a SynergyWorks partner.

LynxOS Embedded RTOS LynxOS-SE Embedded RTOS RTOS: LynxOS-178 for software certification Luminosity Eclipse-based IDE
Embedded Linux: BlueCat LynxSecure Separation Kernel and Embedded Hypervisor SpyKer Embedded-System Trace Tool

Industry Solutions

Migration

Industry Standards

Embedded Systems Technology

RTOS Training for Embedded Systems

Training at LynuxWorks

Embedded System Consulting

LynuxWorks Support

Embedded Systems

LynxOS RTOS Support

BlueCat Embedded Linux Support

Contact Us

About LynuxWorks

Press Room

Newsletter and Announcements

Careers

Site Map

Board Support Packages (BSPs)

BSP Device Drivers

BSP Targets by Operating System

BSP Targets by Form Factor

Third-party I/O Devices and Hardware

SynergyWorks: LynuxWorks partners


What is SynergyWorks?

Third-party add-ons for LynuxWorks operating systems

Copyright © LynuxWorks™, Inc. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of LynuxWorks is prohibited.