| Tews TIP903 | ![]() | |
|---|---|---|
| Industry Pack | PowerPC | v. 4.0 |
| Fieldbus | ||
Tews' TIP903 is an IndustryPack®-compatible module with three complete CAN bus interfaces using three Intel 82527 CAN controllers. The controller supports the standard data and remote frame as well as the extended data and remote frame according to CAN specification 2.0 part A and part B. It has the capability to transmit, receive and perform messages filtering on extended and standard messages.
The TIP903 supports a 16-bit bus interface which permits word and byte accesses to the internal registers of the three CAN controllers. The physical interface supports CAN High Speed according to ISO 11898 for each of the three channels.
The bus line termination is selectable by a jumper separate for each bus line. The data transfer rates up to 1Mbps for bus line length up to 40m are supported.
View more Tews boards, or learn more about Tews Technologies, a SynergyWorks partner.
![]() |
Copyright © LynuxWorks™, Inc. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of LynuxWorks is prohibited. | 20 years of embedded excellence |