| Tews TIP866 | ![]() | |
|---|---|---|
| ip | powerpc | v. 4.0 |
Tews' TIP866 is an IndustryPack®-compatible module providing eight channels of high-performance serial interface. Three different modules are available. The TIP866-10 provides RS232 interface, the TIP866-11 offers TTL level interface and the TIP866-20 provides RS422 interface. Each channel has a 64-byte transmit FIFO and a 64-byte receive FIFO to significantly reduce the overhead required to provide data to, and get data from, the transmitters and receivers. The FIFO trigger levels are programmable.
The TIP866-10 and -11 support RxD, TxD, RTS, CTS and GND for each of the eight RS232 channels. The TIP866-20 supports RxD+/-, TxD+/- and GND for each of the eight RS422 channels.
The baud rate is individually programmable up to 115.2kbaud for the TIP866-10 and up to 460.8kbaud for the TIP866-11 and -20. The TIP866-10 and -20 use ESD protected transceivers (up to +/-15KV according to IEC 1000-4-2).
The module versions TIP866-xx-ET are designed for the extended operating temperature from -40°C to +85°C.
The transition module TIP866-TM-10 provides 8 DB-25 connectors mounted in a 6U 8TE front panel. The TIP866-TM-20 provides 8 RJ45 connectors mounted in a 6U 4TE front panel. The TIP866-TM-30 provides 16 4-pin RJ connectors mounted in a 6U 4TE front panel.
View more Tews boards, or learn more about Tews Technologies, a SynergyWorks partner.








Board Support Packages (BSPs)
BSP Device Drivers |
BSP Targets by Operating SystemBSP Targets by Form Factor |
Third-party I/O Devices and Hardware |
SynergyWorks: LynuxWorks partners
|
Third-party add-ons for LynuxWorks operating systems |
||