RTOS, full virtualization for real-time systems, DO-178B and hypervisor for the most demanding embedded operating system applications...

Tews TCP863Four-channel high-speed synch/asynch serial interface

Tews TCP863
cpcipowerpcv. 4.0

Tews' TCP863 is a standard 3U 32-bit CompactPCI module with four high-speed serial data communication channels. The TCP863 is the successor of the discontinued TCP862, providing similar functionality and full connector and pin-out compatibility.

The serial communication controller is implemented in FPGA logic, along with the bus master capable PCI interface, guaranteeing long-term availability and having the option to implement additional functions in the future. Each channel provides dedicated receive and transmit FIFOs for high data throughput. Data transfer on the PCI bus is handled via TCP863 initiated DMA cycles with minimum host/CPU intervention.

Several serial communication protocols are supported by each channel, such as asynchronous, isochronous, synchronous and HDLC mode. A 14.7456 MHz oscillator provides standard asynchronous baud rates. An additional 24 MHz oscillator is provided for other baud rates. A 10 MHz oscillator is used for the synchronous baud rate of 10 Mbit/s.

Each channel also provides various interrupt sources, generated on INTA. The interrupt sources can be enabled or disabled individually. Multiprotocol transceivers are used for the line interface. The physical interface is selectable by software, individually for each channel as EIA-232, EIA-422, EIA449, EIA-530, EIA-530A, V.35, V.36 or X.21.

The following signals are provided by the TCP863 for each channel at the front and rear-I/O connectors: Receive Data (RxD +/-), Transmit Data (TxD +/-), Receive Clock (RxC +/-), Transmit Clock (TxC +/-), Ready-To-Send (RTS +/-), Clear-To-Send (CTS +/-), Carrier-Detect (CD +/-) and GND. Additionally serial channel 3 provides Data-Set-Ready (DSR3 +/-) and Data-Terminal-Ready (DTR3 +/-) at the front I/O connector.

The TCP863-10 provides front panel I/O via HD68 SCSI-3 type connector and TCP863-20 additionally provides rear I/O via J2.

View more Tews boards, or learn more about Tews Technologies, a SynergyWorks partner.

LynxSecure Separation Kernel and Embedded Hypervisor LynxOS-SE Embedded RTOS Luminosity Eclipse-based IDE
LynxOS Embedded RTOS RTOS: LynxOS-178 for software certification

 

SpyKer Embedded-System Trace Tool

Industry Solutions

Migration

Industry Standards

Embedded Systems Technology

RTOS Training for Embedded Systems

Training at LynuxWorks

LynuxWorks Support

Embedded Systems

LynxOS RTOS Support

Embedded System Consulting

Contact Us

About LynuxWorks

Press Room

Newsletter and Announcements

Careers

Site Map

Board Support Packages (BSPs)

BSP Device Drivers

BSP Targets by Operating System

BSP Targets by Form Factor

Third-party I/O Devices and Hardware

SynergyWorks: LynuxWorks partners


What is SynergyWorks?

Third-party add-ons for LynuxWorks operating systems

Copyright © LynuxWorks™, Inc. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of LynuxWorks is prohibited.