Tews TCP260Dual PMC carrier for 6U CompactPCI (J3/J5 I/O)

Tews TCP260
cpci	powerpc	v. 4.0

Tews' TCP260 is a standard 6U CompactPCI carrier that provides front I/O and rear I/O for up to two single-width PMC modules.

The transparent Intel PCI-to-PCI bridge 21154 is used as the PCI bridging device between the primary CompactPCI bus and the onboard secondary PCI bus where the two PMC slots reside.

Supported PCI bus data widths are 32 bit and 64 bit. Supported PCI bus frequencies are 33 MHz and 66 MHz.

The TCP260 supports standard PMC front I/O and CompactPCI rear I/O. The PMC slot 1 I/O lines are connected directly to the CompactPCI connector J3. The PMC slot 2 I/O lines are connected directly to the CompactPCI connector J5.

The TCP260 also provides hot swapping capability. The TCP260 onboard hot-swap controller controls the installation and reinstallation process of the TCP260 without powering down the CompactPCI system.

The TCP260 carrier complies with the PICMG 2.0 Revision 3.0 CompactPCI specification.

View more Tews boards, or learn more about Tews Technologies, a SynergyWorks partner.