Motorola MVME1600: VME PowerPC baseboard card

Motorola MVME1600
VME PowerPC baseboard card

Motorola MVME1600
	v. 3.10a
Architecture:	PowerPC
Processor group:	Freescale PPC 603/603e/603ev, Freescale PPC 604/604e/604r
Please consult the board-support guide or contact us for specific platform features supported.

The MVME1600 is a 6U VME baseboard for the PowerPC® microprocessor family of VMEbus boards. This card uses the Peripheral Component Interconnect (PCI) bus for all of the peripherals that are on the card. In addition, an industry standard mezzanine interface (PMC) is provided that conforms to the IEEE P1386.1 standard. The MVME1600 card supports one PMC module on the card.

Memory options for the PowerPC 1600 provides you with a mezzanine array that supports from 8 MB to 128 MB of DRAM. The memory does not require any additional VME slots, and the memory can be field upgraded. VMEBus Interface for the PowerPC 1600 is a for D64:A32 master, with complete programmability of the VME interface characteristics. The global control and status register allows board-to-board communications.

Peripheral Interface for the PowerPC 1600 is located on the front panel and the VMEbus P2 connector. There is a 16-bit SCSI-2 connector, SVGA graphics, mouse, and keyboard on the front panel. The P2 connector holds the Ethernet, parallel, and serial ports.

Single 32-Bit PMC Expansion Slot
8K X 8 NVRAM and Time of Day Clock
Four Serial I/O Ports
Two 32-Bit Timers
Four 16-bit Timers
Watchdog Timer
16-Bit SCSI-2 Bus; 32 Bit PCI; Local Bus DMA
Ethernet Transceiver; 32 Bit PCI; Local Bus DMA; AUI Interface; 10base-T Interface
Super VGA Graphics Port; 2 MB RAM; 800 X 600 X 16M colors; 1280 X 1024 X 256 colors; non-interlaced
8-bit Bi-directional Printer Port
A32/D32/BLT64 VMEbus Master/Slave Interface
System Controller
DMA Supports VME64 and PCI Local Bus Burst Cycles
4-level requestor and 7-level interrupt handler
Remote Reset/Abort/LED/Status Control Functions
VMEExec™ Real-Time Development Environment Support