Kontron PowerEngine7VME SBC with single or dual PowerPC 750FX processors operating at up to 1GHz

Kontron PowerEngine7

	v. 4.0
	v. 4.0 (hardware-vendor BSP)
Architecture:	PowerPC / Power Architecture
Processor group:	PowerPC 750 (Freescale and IBM)
Markets:	industrial, medical, military and aerospace
Many of our target-support guides for BlueCat Linux are available for download.
Please consult the board-support guide or contact us for specific platform features supported.

The Kontron PowerEngine7 features single or dual PowerPC 750FX processors, operating at 733 MHz, providing extremely high performance at more than 1600 Dhrystone 2.1 MIPS, while drawing a very low 14 watts of power for the entire board. This makes the PowerEngine7 ideal for demanding environments found in many military and severe environment applications.

The PowerEngine7 SBC includes up to 512 MB of SDRAM memory and up to 128 MB of Flash memory. The performance of PowerEngine7 is enhanced by the 133 MHz Avignon host bridge system controller which is optimized for use with the PowerPC® processor, as well as the ALMA2e PCI/VME bus bridge, providing the capability for 2eSST transfers.

The PowerEngine7 series features all the I/O of full-fledged SBCs including twin PMC slots (one PCI 64 @ 66 MHz, one PCI 32 @ 33 MHz), two 10/100 BaseT Ethernet interfaces, as well as 4 asynchronous and 2 synchronous/asynchronous serial lines. A bridgeless PMC-Carrier is available to expand the PCI-64bit bus on the P0 and increase the number of slots to as many as four.

• Single or dual PowerPC 750FX processors operating at up to 1 GHz
• Extremely high performance at more than 1600 Dhrystone 2.1 MIPS
• Draws a very low 14W of power for the entire board
• 512 KB internal L1 cache clocked at processor frequency
• Includes up to 512 MB of SDRAM memory and up to 128 MB of Flash memory
• Two PMC slots (one PCI 64 @ 66 MHz, one PCI 32 @ 33 MHz)
• Utilizes 133 MHz Avignon host bridge system controller
• ALMA2e PCI/VME bus bridge provides the capability for 2eSST transfers
• Two 10/100 BaseT Ethernet interfaces
• 4 asynchronous and 2 synchronous/asynchronous serial lines
• A bridgeless PMC-Carrier is available to expand the PCI-64 bit bus on the P0 increasing the number of slots to as many as four
• Support for LynxOS® and BlueCat® Linux®
• Available in all ruggedization levels
• Supplied with Kontron's PowerLine4 toolkit for platform management

View more Kontron boards, or learn more about Kontron, a SynergyWorks partner.