RTOS, virtualization for real-time systems, DO-178B and hypervisor for the most demanding embedded operating system applications...

Intel IQ80331 Software Development and Processor Evaluation Kit800 MHz system on a chip (SoC)

Intel IQ80331
BlueCat Embedded Linux v. 5.0
Architecture: ARM
Processor group: XScale® 80200
Markets: storage, networks, telecommunications
Many of our target-support guides for BlueCat Linux are available for download.
Please consult the board-support guide or contact us for specific platform features supported.

The Intel® IOP331 is a highly integrated I/O system on a chip for I/O-intensive storage, networking, communications, and embedded applications. The IOP331 features an 800 MHz CPU, high performance internal bus, dual-ported memory controller, a high-bandwidth PCI-X to PCI-X bridge, and an improved interrupt controller to provide a high-performance, highly integrated processor solution.

Target applications include PCI/PCI-X host-based adapters (RAID cards, iSCSI cards, FC cards, Security/SSL NICs, etc), control plane and system controller applications utilizing PCI/PCI-X as a system interconnect and/or backplane (Virtual Private Network [VPN] devices, video servers, network gateways, network attached storage, external storage arrays), PCI/PCI-X based line cards (VoIP, routers, etc.), and a host of other applications that require a highly integrated, high-performance system-on-a-chip processor.

The IQ80331 board provides 256 MB ECC registered DDR2 SDRAM 400 MHz memory soldered onto the board.

Ultra-fast memory transactions are supported due to a new dual-ported memory controller that provides both a direct port from the CPU to memory (core port) and a port from the ATU/internal bus to memory (internal bus port). DDR2 memory soldered down although registered and unbuffered DDR 333 or registered DDR2-400 DIMMs can be used with the IOP331 in your own design. The memory controller supports 32-bit or 64-bit memory subsystems with or without ECC.

The kit includes the PCI-X card and a complete set of software development tools—including IDE, compiler suites, JTAG debugging and flash programming hardware and software. Firmware and BSP support utilities such as Red Hat RedBoot are included in the kit with comprehensive documentation.

View more Intel boards, or learn more about Intel—a SynergyWorks partner.

LynxOS Embedded RTOS LynxOS-SE Embedded RTOS RTOS: LynxOS-178 for software certification Luminosity Eclipse-based IDE
Embedded Linux: BlueCat LynxSecure Separation Kernel and Embedded Hypervisor SpyKer Embedded-System Trace Tool

Industry Solutions

Migration

Industry Standards

Embedded Systems Technology

RTOS Training for Embedded Systems

Training at LynuxWorks

Embedded System Consulting

LynuxWorks Support

Embedded Systems

LynxOS RTOS Support

BlueCat Embedded Linux Support

Contact Us

About LynuxWorks

Press Room

Newsletter and Announcements

Careers

Site Map

Board Support Packages (BSPs)

BSP Device Drivers

BSP Targets by Operating System

BSP Targets by Form Factor

Third-party I/O Devices and Hardware

SynergyWorks: LynuxWorks partners


What is SynergyWorks?

Third-party add-ons for LynuxWorks operating systems

Copyright © LynuxWorks™, Inc. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of LynuxWorks is prohibited.