Force PowerCore CPCI-680
 |
v. 4.0, 3.11 |
| Architecture: |
PowerPC |
| Processor group: |
Freescale MPC74xx, PowerPC 750 (Freescale and IBM) |
| Market: |
telecommunications |
| Please consult the board-support guide or contact us for specific platform features supported. |
The Force PowerCore™ CPCI-680 CompactPCI® (6U) single-board computer brings
new levels of flexibility and power to embedded telecommunications, data communications and industrial
applications.
The first product based on Force's pioneering Sentinel™ universal PCI-to-PCI bridge
technology, the PowerCore CPCI-680 functions as both a high-performance system controller and an intelligent
peripheral card, without any need for hardware or software reconfiguration when switching from one mode
to the other. This, combined with its advanced PowerPC® G4 7400 processor and broad array of interfaces,
makes the PowerCore CPCI-680 an ideal choice for constructing fast-to-market high reliability and multicomputing-based
platforms.
Features
- Force's Sentinel Universal PCI bridge—switching of operating modes between system slot function
and peripheral slot function
- New generation of PowerPC G4 7400 processor/1 GByte high-speed memory for "supercomputing"
performance
- Ideal for real-time operating systems (RTOS) or Linux® platforms
- Low power consumption
- Full Hot-Swap support for CompactPCI
Specifications
- Processor Subsystem:
- Processor: PowerPC G4 (7400), 400 MHz and higher; L2 Cache: 2 MByte running at half of the processor
speed
- Local Bus: PCIbus connecting processor to local I/O devices, PMC slots, and CompactPCI interface
- Main Memory: Up to 256 MByte on-board SDRAM with ECC, 100 MHz memory bus, up to 1 GByte SDRAM with
ECC in a single slot via memory modules
- User Flash Memory: Up to 16 MByte, on-board programmable
- Boot Flash Memory: Two sockets each 512 KByte
- I/O Capabilities:
- Two Fast Ethernet interfaces via 82559: One 10/100BaseTX on front panel, one 10/100 BaseTX via rear
I/O
- IDE Flash Disk: Optional on-board CompactFlash Card Interface offers socket for Type II cards
- Two Fast Ethernet interfaces via 82559: One 10/100BaseTX on front panel, one 10/100 BaseTX via rear
I/O
- Two 16C550, RS-232, I/O on front panel
- Optional Fast Wide SCSI-2 via pre-installed SSIO PMC module
- PMC Expansion: Up to 2 slots, conforming IEEE P1386.1, both slots with rear interfacing, 64 user I/O
of both slots
- CompactPCI Interface: Universal PCI-to-PCI bridge, system slot and peripheral slot, 32-bit,
33 MHz
- Operating Range:
- Temperature: 0ºC to +55ºC with forced air cooling
- Relative Humidity: 5% to 95% @ 40ºC non-condensing
- Storage Range:
- Temperature: -40ºC to +85ºC
- Relative Humidity: 5% to 95% @ 40ºC non-condensing
- Dimensions: Single slot 6U CompactPCI, 160 mm x 233.5 mm / 6.29" x 9.18"
View more Force boards.