Dynatem CRM1Conduction-cooled CompactPCI/PICMG 2.16 Pentium-M Single-Board Computer

Dynatem CRM1

	v. 4.2 (hardware-vendor BSP)
Architecture:	x86
Processor group:	Pentium M
Markets:	industrial, military and aerospace
Please consult the board-support guide or contact us for specific platform features supported.

The CRM1 from Dynatem is a rugged conduction-cooled 6U single-slot CompactPCI (PCMG 2.16 compatible) platform based on the Intel® low-power Pentium® M processor. The CRM1 takes advantage of the Pentium M's low-power consumption as a rugged Single-Board Computer (SBC) with wedge locks and a full-board heat sink for high shock/vibration environments and temperature extremes.

The CRM1 is the same board design as the convection-cooled CPM1. The CPM1 typically uses front-panel I/O routing but can be provided with identical I/O routing as the CRM1 for application development in a standard CompactPCIbus chassis.

The 855GME Graphics Memory Controller Hub (GMCH) and 6300ESB I/O Controller Hub (ICH) chipset supports PCI-X expansion, integrated VGA/DVO interface. I/O interfaces available from rear I/O board include two 1000BaseTX ports are routed to the backplane in compliance with PICMG 2.16. Other rear I/O includes IDE, COM1/2, floppy, dual SATA, four USB 2.0 ports and DVI-I integrated digital/analog graphics.

The CRM1 meets an operating temperature range of -40°/85° C with its standard 1.4 GHz Pentium M processor.

Onboard CompactFlash permits single-slot booting. Two onboard PMC-X sites allow additional I/O capabilities in a single 6U slot.

The CRM1 was designed for compliance with MIL-STD-810F. Options include conformal coating.

View more Dynatem boards, or learn more about Dynatem, a SynergyWorks partner.