Curtiss-Wright SVME/DMV-181: PowerPC single-board computer (SBC)

Curtiss-Wright SVME/DMV-181
PowerPC single-board computer (SBC)

Curtiss-Wright SVME/DMV-181
	v. 4.0 (hardware-vendor BSP)
Architecture:	PowerPC
Processor group:	Freescale MPC74xx
Market:	military and aerospace
Please consult the board-support guide or contact us for specific platform features supported.

The Curtiss-Wright (formerly DY 4) SVME/DMV-181 single-board computer combines a processing core based on the powerful AltiVec™-equipped PowerPC® 7410 processor with an unmatched I/O complement highlighted by dual 10/100Base-T Ethernet ports, 6 serial channels, and two USB ports.

Jam-packed with features to satisfy the real-world requirements of defense- and aerospace-systems integrators around the globe, the SVME/DMV-181 is designed with performance, reliability, and ease of use in mind. The SVME/DMV-181 delivers a complete hardware, software, and support-ware solution.

For retrofit and technology insertion applications, the SVME/DMV-181 offers a superset of the I/O features of earlier generations of Dy 4 PowerPC SBCs and optional pin-out modes for pin-out compatibility as well. As a member of Curtiss-Wright's continuously evolving stream of PowerPC SBCs including the popular SVME/DMV-179, SVME/DMV-181 supports the life-cycle model of successive technology insertions throughout a platform's lifetime.

PowerPC 7410 500MHz (AltiVec technology-enhanced) CPU
1 Gbyte Synchronous DRAM with ECC without mezzanines
2 Mbytes of L2 cache
Peak processor-memory bandwidth of 800 Mbytes/sec; peak L2 cache bandwidth of 1.143 Gbytes/sec
Up to 96Mbytes of 64-bit wide direct memory-mapped Flash memory
Dual 64-bit PCI local buses, 528 Mbytes/sec peak data transfer rate
Two IEEE P1386/1386.1 64-bit PMC sites for high-performance I/O expansion
Two EIA-232 serial ports
Four HDLC/SDLC-capable EIA-422/485 serial channels
Two USB 1.1 Interfaces
16 bits of discrete TTL I/O, each with interrupt capability
IXLibs-AV Altivec-optimized DSP Library
Available in a range of ruggedization levels, both air and conduction-cooled.
LynxOS® reference port
Occupies single .8" slot in all configurations
Base card uses +5 V only, backplane 3.3 V, 5 V and ±12 V are routed to the PMC sites
Supported by a dedicated staff of factory-based product support specialists and a network of regional field application engineers